Power Your Sub with Rockford Fosgate R2-1200X1 Amp

Powerful Performance: 400W RMS at 4Ω, 800W RMS at 2Ω, and 1,200W RMS at 1Ω
Customizable Bass: Adjustable low-pass filter, infrasonic filter, and Punch bass boost to optimize sound for any subwoofer and enclosure
Easy Setup: C.L.E.A.N. technology with indicator lights ensures optimal gain setting
Versatile Installation: Compatible with both aftermarket and factory stereos via RCA or speaker-level inputs
Convenient Control: Included wired remote level control for bass adjustment from your dashboard
Class-D Efficiency: Advanced design provides high power output in a relatively compact form factor
CTA-2006 Compliant: Meets industry standards for accurate power ratings

RMS Power Output:
- 400 watts × 1 at 4 ohms
- 800 watts × 1 at 2 ohms
- 1,200 watts × 1 at 1 ohm
Minimum Impedance: 1 ohm
Frequency Response: 20-250 Hz
THD at Rated RMS Power: 1%
Signal-to-Noise Ratio: 75 dB
Input Voltage: 14.5V
Fuse Rating: 200 amp (external, not included)
Replaces Previous Model: Rockford Fosgate R1200-1D

Dimensions:
- Width: 11-1/4 inches
- Height: 2 inches
- Depth: 7-3/4 inches
Mounting Options: Vertical, horizontal, or inverted (horizontal recommended for best cooling)

Amplifier Class: D
Built-in DSP: No
Fan Cooled: No
C.L.E.A.N. System: Calibrated Level Eliminates Audible Noise with clip indicator lights

Gain Control: Rotary control (labeled 0-11)
- Input sensitivity: 150mV-4V line level or 450mV-12V speaker level
Crossover Controls:
- Variable low-pass filter (50-250 Hz, 12 dB/octave), always engaged
- Variable infrasonic filter (15-40 Hz, 12 dB/octave)
Bass Enhancement: Variable Punch EQ bass boost (0-18 dB at 45 Hz)
Remote Level Control Dimensions:
- Width: 1.16″ (2″ including mounting flanges)
- Height: 0.92″
- Depth: 1.55″ (2.375″ including knob and wiring)

Input Options:
- RCA inputs (balanced differential, nickel-plated)
- Speaker-level inputs with included harness
Output Options: RCA pass-thru jacks for additional amplifiers
Auto Turn-on: Switch for DC offset detection with speaker-level inputs
Power/Ground Terminals: Set-screw terminals (accommodate up to 4-gauge wire)
Remote Turn-On Terminal: Set-screw terminal (accommodates up to 8-gauge wire)
Speaker Terminals: Set-screw terminals (accommodate up to 8-gauge wire)
Power Recommendations: 4-gauge power and ground leads, 200-amp fuse within 18″ of battery

Mono subwoofer amplifier
Wired Remote Level Control module
16′ Remote cable (RJ-25 connector on both ends)
One 7″ Speaker input harness
3mm Allen Hex key
Mounting hardware:
- Four 3/4″ screws
- Two 1/2″ screws
- 5 flat washers
- 1 nut

Hurry up, Our Father's Day Sales Ends In: