About the Rockford Fosgate T1S-1x10P
More details on the Rockford Fosgate T1S-1x10P
Features & specs
| General | ||
|---|---|---|
| Woofer Size (inches) | 10 | |
| Speakers Per Box | 1 | |
| Woofer Material | Carbon/PMI/Glass | |
| Enclosure Type | Ported | |
| Color | Black | |
| Pieces in System | 1 | |
| Width (inches) | 31-3/4 | |
| Height (inches) | 14-3/4 | |
| Depth (inches) | 8 | |
| Connector Type | Spring post | |
| Frequency Response | 32-250 Hz | |
| Power Handling (Watts RMS) | 500 | |
| Power Handling (Watts Peak) | 1000 | |
| Sensitivity | 82 dB | |
| Impedance | 1 ohms | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Features
Solid MDF Construction: The enclosure is built using high quality 5/8″ MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.
Power Handling: The subwoofer can handle up to 500 watts RMS; 1000 watts peak.
Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the right side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Ported Enclosure: There is a side firing (left side), high flow, low noise slot port at the bottom of the enclosure.
Dimensions: The depth dimensions listed in Features and Specs include the subwoofer’s grille, which adds approximately 1-5/8″; the depth of just the enclosure is 6-3/8″ at the base and 4-3/8″ at the top. Using the included mounting brackets during installation adds approximately 1-3/8″ to the width (33-1/8″ total).
Power Series Woofer: The enclosure houses one front-firing Rockford Fosgate T1S1-10 1Ω, 10″ subwoofer, which offers these features:
- CEA-2031 Compliant: The power rating on the T1S1-10 subwoofer conforms to CEA-2031 industry standards, meaning it has the capacity to handle its rated power under continuous demand.
- Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the sub’s motor structure, voice coil alignment, and suspension to yield the best possible performance.
- EVCC: Rockford Fosgate’s Encapsulated Voice Coil Coupling (EVCC, Patent Pending) technology connects to the subwoofer’s voice coil from both the top and bottom and provides a more secure mounting platform for both the dual spiders and cone assembly.
- SYMS: Unlike a traditional motor assembly, Split Yoke Motor Technology (Patent Pending) moves the magnet inside the voice coil. This design allows greater excursion than typical shallow subwoofers.
- VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker’s effective radiating cone area without increasing the size of the basket.
- Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.
