Rockford Fosgate Power T400X4ad

$570.00

Compact 4-channel car amplifier — 100 watts RMS x 4

The Rockford Fosgate Power T400X4ad is an ultra-compact 4-channel amplifier that delivers impressive power in a remarkably small footprint. This versatile amplifier can provide up to 100 watts RMS per channel to four separate speakers, or it can be bridged to deliver 200 watts RMS to each of two channels—perfect for powering component speakers or subwoofers.

Despite its compact size (just 8-5/8″ × 4-5/16″), this amplifier incorporates Rockford Fosgate’s proprietary Class AD technology, combining the high fidelity of Class A with the high efficiency of their special Class D design. This ultra-efficient amp produces more power with less current draw from your vehicle’s charging system than most comparable amplifiers.

The T400X4ad features Rockford’s Constant Power technology, which actively monitors speaker performance and increases internal voltage and current flow when speaker impedance rises. This results in up to 25% more total power output. A dual-fan forced air cooling system prevents overheating, enabling sustained high-output performance even in challenging conditions.

Product Highlights

  • 4-channel car amplifier in an ultra-compact chassis
  • Power output:
    • 100 watts RMS × 4 at 2 to 4 ohms
    • 200 watts RMS × 2 bridged at 4 ohms
  • Class AD amplifier design for higher efficiency
  • Constant Power technology maintains full output despite impedance changes
  • C.L.E.A.N. gain setup system with clip indicators
  • Dual-fan forced induction cooling system
  • Variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
  • Punch EQ bass/treble boost (0-18 dB at 45 Hz, 0-14 dB at 12,500 Hz)

Package Contents

  • T400X4ad 4-channel amplifier
  • Two 14″ input harnesses (4-pin Molex connector to 2 female RCAs)
  • Two 8″ speaker output harnesses (4-pin Molex connector to bare wire)
  • Amplifier Quick Setup sheet
  • Certificate of Performance Verification

Performance Specifications

  • Power Output:
    • 100 watts RMS × 4 at 4 ohms
    • 100 watts RMS × 4 at 2 ohms
    • 200 watts RMS × 2 at 4 ohms bridged
  • Frequency Response: 20-20,000 Hz
  • Total Harmonic Distortion: 1% at rated power
  • Signal-to-Noise Ratio: 90 dB
  • Input Voltage: 14.4V
  • Minimum Impedance: 2 ohms (unbridged), 4 ohms (bridged)

Amplifier Technology

  • Class AD technology for superior efficiency
  • Dynamic Frequency Switching for better signal resolution
  • Post Choke Feedback Filtering to reduce distortion
  • Differential input circuitry to eliminate noise and hum

Crossover Features

  • Variable high-pass/low-pass filters (50-250 Hz, 12 dB/octave)
  • 3-way crossover switch: Low-Pass (LP), High-Pass (HP), or All-Pass (AP)

Audio Controls

  • Independent input level controls for front and rear channels
  • 2/4 channel input switch
  • Variable Punch EQ:
    • 0-18 dB at 45 Hz (low-pass mode)
    • 0-14 dB at 12,500 Hz (high-pass mode)
    • Both bass and treble boost in all-pass mode
  • C.L.E.A.N. setup system with input/output clip indicators

Input/Output Options

  • Speaker-level and RCA line-level inputs
  • Signal-sensing auto turn-on with speaker-level inputs
  • Front and rear channel inputs
  • Quick-disconnect Molex connectors for inputs and outputs

Physical Specifications

  • Dimensions: 8-5/8″W × 1-5/8″H × 4-5/16″D
  • Dual cooling fans with forced induction design
  • Top-mounted controls for easy access
  • LED indicators for power, protection, and clipping
  • Recommended fuse: 60-amp (not included)
  • Power/ground terminals accept up to 8-gauge wire

Special Features

  • Ultra-compact design for flexible installation options
  • Top heat sink remains cool to the touch
  • Protection circuitry for thermal, short circuit, and impedance faults
  • Remote output for triggering additional amplifiers
  • Status LEDs change color to indicate operating condition
  • No onboard fuses (requires external 60A fuse, not included)
Scroll to Top
2