The Power T2500-1bdCP is a 2,500 Watt mono amplifier featuring Constant Power. The T2500-1bdCP is so flexible and powerful you can use a pair in bdSYNC mode to create one massive amplifier that can deliver a whopping 5 Kilowatts.
The T2500-1bdCP is based on the legendary T2500-1bd amplifier design with a proprietary “Constant Power” configuration that delivers up to 25% more power (Watts) across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1bdCP amplifier pumps out 2,500 watts, easily driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!
FEATURES AT A GLANCE
- MOSFET power supply
- RCA pass-thru outputs
- Audiophile grade speaker connections
- Infrasonic filter
- 24dB/octave crossover
- 1/0 AWG power/ground connectors
- MasterSync – allows 1 amplifier to control an array of amplifiers
- PowerSync – allows 2 amplifiers to be “strapped” together
- 0°/180° Phase Switch
- Blue L.E.D. Simulated VU Signal/Power Meters
- MOSFET output stage
- 2-Year Warranty
| Specification | Value |
|---|---|
| CTA-2006 Compliant | Yes |
| Number of Channels | 1 |
| Total Power (Sum of Rated Power) | 2500 Watts RMS |
| Rated Power (RMS Continuous Power) | 1500 Watts x 1 @ 4-Ohm – 2500 Watts x 1 @ 2-Ohm – 2500 Watts x 1 @ 1-Ohm |
| Two amplifiers in bdSYNC | 5000 Watts x 1 @ 2-Ohm |
| Dynamic Power (PVC/PowerCube®) | 1823 Watts x 1 @ 4-Ohm – 2940 Watts x 1 @ 2-Ohm – 2980 Watts x 1 @ 1-Ohm |
| Bridgeable | Yes – (two amps can be “strapped” together using bd-Sync2 cable to create one monster amplifier) |
| Frequency Response | 20Hz to 250Hz +/-0.5dB |
| Input Sensitivity | 150 mV to 4 V |
| Circuit Topology Class | Class BD |
| Efficiency (average) | 81.9% @ 4-Ohm – 77.7% @ 2-Ohm – 64.5% @ 1-Ohm |
| Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0% – 2-Ohm: <1.0% – 1-Ohm: <1.0% |
| Signal Input | 1 RCA pair |
| Signal Output | 1 RCA pair |
| Tone Controls | Bass: 0dB to +18dB @ 45Hz |
| Crossover Controls | Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth – Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz |
| Remote Controls | Optional Remote PEQ – (overrides built-in Punch Bass) |
| Visual Indicators | Power (Blue LED) – Thermal (Red LED) – Protect (Yellow LED) – Output -00dB to +2dB @ 11 steps (Blue LEDs) – Battery 9VDC to 16VDC @ 11 steps (Blue LEDs) |
| Power Wire Gauge | 1/0 AWG |
| Power Input Connector | Block |
| Speaker Wire Gauge | 8 AWG to 16 AWG |
| Speaker Output Connector | Block |
| Cooling | Convection – Heatsink |
| Operating Voltage | 9 – 16 VDC |
| Recommended Fuse (not included) | 300 A |
| Average Current Draw (13.8V Music) | 175 A |
| Max. Current Draw (13.8V Sinewave) | 350 A |
| Suggested Alternator | 200 A |
| Dimensions (H x W x D) | 2.14 x 8.14 x 21.875 (in) – 5.44 x 20.68 x 55.66 (cm) |
| Shipping Weight | 21.7 Lbs. (9.84 Kg.) |
