AudioControl LC2i PRO Line Output Converter

$150.00

2-channel LOC with AccuBASS™

High-level input line output converter. More and more aftermarket amplifier installations depend on using the factory amp’s powered outputs for its inputs. AudioControl’s LC2i PRO line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can then be fed to another processor, a full-range amplifier, or your subwoofer amp.

Bass feature. Some factory radios dial down the bass as you turn up the volume to protect the flimsy factory speakers. The problem is, they don’t give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i PRO with their AccuBASS™ circuitry that reverses the factory low-frequency roll-off, giving you the bass you need to enjoy your music to the fullest.

Installation conveniences. The included dash-mount wired remote control allows you to adjust the level of your sub channel on the go. Load selection switches make OEM integration easier, so the LC2i PRO will work with almost any factory sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sense, or remote 12 volt inputs.

Product Highlights

  • 2-channel active line output converter
  • ACR-1 wired remote bass level control included
  • 2 speaker-level inputs with 40-volt (400 watts RMS) power handling
  • Main and Bass preamp-level outputs (up to 9.5 volts)
  • Main and Bass output controls for level matching
  • Adjustable AccuBASS corrects for factory bass roll-off
  • Selectable turn-on options: GTO signal Sense (DC offset), audio sense, or remote 12 volt input
  • 12-volt turn-on lead output
  • Recommended fuse rating: 1 amp
  • Dimensions: 6-15/16″W x 1″H x 3″D
  • Weight: 0.75 pound

Package Contents

  • Two-Channel line output converter
  • Two 4-pin captive-screw connectors (installed)
  • ACR-1 Level control
  • 16.5′ Level-control cable (RJ-14)
  • Quickstart guide (on cardboard label)
  • Owner’s manual

Physical Specifications

  • Dimensions: 6-15/16″W x 1″H x 3″D
  • Weight: 0.75 pound
  • Compact chassis design for unobtrusive installation
  • Integrated mounting flanges

Performance Specifications

  • Maximum Input Handling: 40V/400W (20kΩ setting)
  • Maximum Output Level: 9.5Vrms
  • Output Gain: ± 12dB
  • Frequency Response: 20Hz – 50kHz
  • THD: 0.01%
  • Signal to Noise: >110dB
  • ACR-1 Attenuation Range: 0dB to -19dB
  • Input Impedance: Selectable – 20Ω, 60Ω, and 20kΩ
  • Output Impedance: 150Ω
  • Power Draw: 200mA

Features

  • Active circuitry for improved sound quality
  • Two channel speaker-level input with removable captive-screw terminals
  • 9.5-volt RMS (13-volt peak) Main and Bass preamp outputs
  • AccuBASS processing for correction of bass roll-off
  • Threshold and Level controls
  • 3-position Load Select switch:
    • 20Ω: For non-amplified Dodge/Chrysler/Jeep/RAM/Fiat systems
    • 60Ω: For amplified (“Premium”) Dodge/Chrysler/Jeep/RAM/Fiat systems
    • 20kΩ: For most other vehicle applications
  • 3-position Trigger Mode switch:
    • GTO Signal Sense: Senses DC offset when factory radio is powered on
    • Audio: Activates when sound source is played
    • Remote In: Traditional +12V input activation
  • 3-position Ground Isolation switch:
    • GND: Power ground and audio ground tied together
    • ISO: Power ground and audio ground separated
    • 200Ω: 200 ohms resistance between power ground and audio ground
  • Included ACR-1 wired remote for Bass Output level adjustment
Scroll to Top
1